Pipe Offset Calculator!

About this app

Pipe Offset Calculator gives plumbers and pipefitters the four calculations they run every day — rolling offsets, simple offsets, drainage grade, and end-to-end cut lengths — with huge type you can read across the trench and a fraction keypad built for a tape measure, not a spreadsheet. No subscription. No account. Works offline. Your data never leaves your device. ROLLING OFFSET Enter the set (or rise) and roll, pick your fitting angle — 22½°, 30°, 45°, 60°, 90°, or any custom angle — and get true offset, travel, and run instantly, with a labeled diagram so you always know which number is which. SIMPLE OFFSET Single-plane offsets: one measurement in, travel and run out, drawn to your actual fitting angle. GRADE Drainage slope both directions: run + grade gives you the drop, or run + drop gives you the grade — in inches-per-foot and percent, with one-tap presets for 1/8″, 1/4″, and 1/2″ per foot. CUT LENGTH & REFERENCE A plain-English takeout explainer, standard butt-weld elbow takeout rules, and a cut-length calculator: travel minus both fitting takeouts equals the pipe you actually cut. Plus a full sixteenths decimal-to-fraction table. BUILT FOR THE JOBSITE • Every measurement works both ways: feet-inches-sixteenths AND decimal inches — enter either, read both (27-3/16″ and 27.19″) • Custom fraction keypad with 1/16″ steps and ±1/16″ nudge buttons • Big result cards — tap any result to copy it • Your numbers are saved automatically, per tab • One-handed layout, haptic feedback, full dark mode • 100% offline — works in the basement, the crawlspace, and the parking garage Buy it once, use it every day.

Momentum comes from crawler snapshots for the tracked storefront. “Viral growth signal” means unusually fast recent rating gains; it is an indicator, not download data.

1. First observed Aug 24, 2026 · 12:13 AM $4.99