StudSearch: Stud Finder

About this app

■ Find where it's safe to drill Mounting a TV, shelf, or handrail on drywall alone is dangerous — screws can pull out. To fix things safely you need to drive screws into a stud. StudSearch uses your iPhone's magnetometer to detect the screws behind the drywall and locate the studs. ■ Works with your walls ・Wood-frame / light-gauge steel (LGS) modes — the magnetic signature differs, so detection is tuned per mode ・Stud-spacing guide: 16" / 24" on center (406/610mm), plus Japanese 303/455mm — find one stud, predict the next ・Real-time graph and readout of the magnetic response ■ Simple to use 1. Take the phone out of its case and reset the baseline 2. Sweep slowly along the wall without rotating the phone 3. When you get a hit, mark it — then trace above and below to confirm a vertical line ■ Guides and safety notes, supervised by a licensed architect Includes how-to guides for TV mounting, shelves and handrails, plus stud-finding basics, supervised by a Japanese first-class licensed architect. For safety-critical fixtures such as handrails, we recommend a final check with a mechanical (needle-type) stud finder. ※ This app estimates stud positions from magnetic response. Metal other than screws (wiring, pipes, etc.) also reacts. Always confirm by other means before drilling. See the in-app disclaimer for details.

• Audio feedback — the closer to the stud, the higher the tone (works even with the silent switch on) • Built-in level: mark the stud, then level your shelf line right away • Improved detection engine — steadier handheld, and it warns you when the magnetic environment is too noisy • Cleaner single-screen Scan layout

Momentum comes from crawler snapshots for the tracked storefront. “Viral growth signal” means unusually fast recent rating gains; it is an indicator, not download data.

1. First observed Aug 20, 2026 · 6:54 PM Free